Your dose comes from the clinician who prescribed it. Nothing on this page suggests a dose, a schedule, or a change to what you were told to take. This is only the arithmetic that turns a prescribed amount in milligrams into a mark on a syringe barrel.
If you want the actual dose ladders for GLP-1 medications, those live on separate pages: the tirzepatide dosage chart and the semaglutide dosage chart.
Your dose comes from your prescriber, not a calculator
A dose is a clinical decision. It depends on your history, your other medications, how you've tolerated treatment so far, and what your provider is trying to accomplish. No formula on the internet can make that call, and this page doesn't try.
What a formula can do is remove ambiguity once the decision is made. You've been told to take a certain number of milligrams. Your vial holds a certain concentration. The syringe is marked in units. The math connects those three things, and it is the same math every time.
Compounded medications are not FDA approved finished products. A licensed provider determines eligibility. The FDA describes compounding as a practice in which a licensed pharmacist, a licensed physician, or a person under the supervision of a licensed pharmacist combines, mixes or alters ingredients of a drug to create a medication tailored to the needs of an individual patient, and notes that compounded drugs are not FDA approved, which means the agency does not review their safety, effectiveness or quality before they are marketed. Belle's compounded medications are custom-prepared by licensed compounding pharmacies and are not evaluated by the FDA for safety or effectiveness. That applies to compounded tirzepatide and compounded semaglutide alike.
The three numbers you need: your dose in mg, your vial concentration in mg per mL, and your syringe scale
Before you touch a syringe, write down three numbers.
- Your prescribed dose in milligrams, exactly as written on your prescription instructions.
- The concentration of your vial in milligrams per milliliter, read off the pharmacy label on the vial in front of you.
- Your syringe scale. A U-100 insulin syringe is the common one, and the rest of this article assumes that scale.
MedlinePlus explains the scale plainly: standard insulin contains 100 units in 1 milliliter, which is also called U-100 insulin, most insulin syringes are marked for giving U-100 insulin, and every small notch on a standard 1 mL insulin syringe is 1 unit. That is why the conversion factor in step 3 is always 100 on this type of syringe.
Note the wording throughout: units, written out in full. Not "u." Not "IU." Those abbreviations get confused with each other and with milligrams, and that confusion is exactly what the math is meant to prevent.
Step 1: Read the concentration on your vial label
Pick up the vial. Find the strength printed on the pharmacy label. You are looking for a number followed by "mg/mL" or "mg per mL."
Labels sometimes state strength two ways at once: the total milligrams in the total volume, and then the concentration in parentheses. A manufacturer label can read, for example, "10 mg/2.4 mL (4.17 mg/mL)" or "20 mg/2.4 mL (8.33 mg/mL)." The number in parentheses is the concentration, and that is the number step 2 uses. The total-in-total figure tells you how much is in the whole vial, not how much is in each milliliter.
Use the concentration from your own vial, every time. The FDA has noted that product concentrations may vary depending on the compounder, and that a single compounder may offer multiple concentrations. A number you saw on a forum, in a video, or on a previous vial is not a substitute for the label in your hand.
If your vial arrives as a liquid
Nothing extra to do. The label states the strength in milligrams per milliliter, so you start at step 1 with that number and move on.
If your vial arrives as a powder that needs mixing
Follow the mixing instructions your pharmacy sent with the vial and use the milligrams per milliliter the pharmacy gives you as your step 1 number.
Step 2: Divide your dose by the concentration to get mL
The formula is one line:
Dose in mg divided by concentration in mg per mL = volume in mL
Milligrams cancel out and you are left with milliliters. That is the physical amount of liquid you need in the barrel. Keep the result in milliliters for a moment before converting, because milliliters are what the syringe is actually measuring.
A quick sanity check: if the concentration is a larger number, the volume gets smaller. A more concentrated vial means less liquid for the same dose in milligrams. If your answer moves the wrong direction when you change the concentration, you've divided backward.
Step 3: Multiply mL by 100 to get units on a U-100 syringe
The last step:
Volume in mL x 100 = units on a U-100 syringe
This works because a U-100 syringe holds 100 units in 1 mL, and each small notch on a standard 1 mL syringe is 1 unit, per MedlinePlus. So 1 mL is 100 units, 0.5 mL is 50 units, and 0.1 mL is 10 units.
The FDA gives a useful check in the other direction: in several reports, patients were instructed to use a U-100 (1 milliliter) insulin syringe to draw small doses, such as a 5-unit (0.05 milliliter) dose, from a multiple-dose vial. Five units is 0.05 mL. If your conversions agree with that relationship, your factor of 100 is being applied correctly.
Worked math examples
These are arithmetic demonstrations with round illustrative numbers. They are not dose recommendations, they are not Belle product doses, and they are not a suggestion for what anyone should take.
| Math example | Dose in mg | Vial concentration | Step 2: mL | Step 3: units on U-100 |
|---|---|---|---|---|
| Math example A | 3 mg | 10 mg per mL | 0.3 mL | 30 units |
| Math example B | 3 mg | 8 mg per mL | 0.375 mL | 37.5 units |
| FDA conversion check | n/a | n/a | 0.05 mL | 5 units |
Look at what changed between example A and example B. The dose in milligrams is identical. Only the concentration moved, and the syringe reading moved with it. This is the single most important idea on the page: the number of units is not the dose. It is the volume that happens to contain the dose in that particular vial.
Syringe units measure volume, not IU
The markings on an insulin syringe are volume markings. They are not international units, and they are not milligrams. The FDA has pointed out that instructions accompanying a compounded drug may tell users to administer injections in "units" (the volume of which may vary depending on the concentration), rather than milligrams or milliliters.
That parenthetical is the whole issue. The same number of units can hold different amounts of drug in two different vials. So "I take 30 units" means nothing without the concentration attached, and comparing unit counts with another patient tells you nothing at all.
This also explains why the math matters. The FDA has noted that many patients who received vials of compounded semaglutide lacked experience with self-injections, and that unfamiliarity with withdrawing medication from a vial into a syringe, coupled with confusion between different units of measurement such as milliliters, milligrams and "units," may have contributed to dosing errors. Doing the conversion deliberately, with your own label in front of you, is how you avoid that confusion. The FDA alert referenced here concerns compounded semaglutide, and it is cited for the measuring lessons only.
When your result lands between two marks
Math example B lands on 37.5 units. Every small notch on a standard 1 mL syringe is 1 unit, so there is no 37.5 mark to line up with. The result sits between two notches.
Do not round up on your own. Do not round down on your own. Do not eyeball the gap and hope. The FDA encourages patients to talk with their health care provider or compounder about how to measure and administer the intended dose. That is the correct move here: ask, and use the answer you're given.
The same applies when anything else looks off. Check every result against the pharmacy label and your prescription instructions before you draw a dose. If the concentration on the label doesn't match what you expected, if your arithmetic produces a volume that looks unusual, or if the instructions and the label seem to disagree, stop and contact your care team before injecting.
Questions to ask your prescriber or pharmacy
Bring these to your visit or your pharmacy call. They're short, and they close the gaps where errors happen.
- What is the concentration of my vial in milligrams per milliliter?
- What volume in milliliters does my prescribed dose work out to?
- How many units is that on the syringe you sent me, and is it a U-100 syringe?
- My result lands between two marks. How should I measure it?
- If my vial is a powder, what milligrams per milliliter should I use after mixing?
- Has my concentration changed since my last vial?
If you're new to injections generally, how peptide telehealth works walks through what happens between the online visit and the package arriving. For specific compounds, see the sermorelin guide and the BPC-157 guide. Peptides other than approved drugs are investigational, and your provider will tell you what applies to your situation.
Belle's pricing is shown live below, and you can review the full lineup at treatments or start with sermorelin.
| Treatment | Starting price | Details |
|---|---|---|
| Compounded Tirzepatide | From $179/month | Treatment page |
| Compounded Semaglutide | From $109/month | Treatment page |
| Sermorelin | From $119/month | Treatment page |
Prices shown are current Belle prices and update automatically. Compounded medications are not FDA approved finished products. A licensed provider determines eligibility.
Check eligibilityOne last time, because it's the point of the page: this is arithmetic, not advice. Decisions about your dose, your schedule, and any change to either belong to the licensed provider who prescribed your treatment.
Common questions
How do I convert milligrams to syringe units?
Three steps. Read the concentration in milligrams per milliliter from your vial label. Divide your prescribed dose in milligrams by that concentration to get volume in milliliters. Multiply the milliliters by 100 to get units on a U-100 syringe, because a U-100 syringe holds 100 units in 1 mL.
Why is 1 mL equal to 100 units?
That is how the U-100 syringe scale is built. MedlinePlus explains that standard insulin contains 100 units in 1 milliliter, that most insulin syringes are marked for U-100, and that every small notch on a standard 1 mL insulin syringe is 1 unit.
Are syringe units the same as IU?
No. Syringe units are volume markings, not international units and not milligrams. The FDA has noted that instructions may tell users to administer injections in units, the volume of which may vary depending on the concentration, rather than in milligrams or milliliters.
Can I use a concentration I found online instead of my label?
No. The FDA has noted that product concentrations may vary depending on the compounder, and that a single compounder may offer multiple concentrations. Use the number printed on the vial in front of you.
What if my calculation lands between two marks on the syringe?
Don't round up or guess. The FDA encourages patients to talk with their health care provider or compounder about how to measure and administer the intended dose. Call and ask before you draw anything.
My vial came as a powder. What concentration do I use?
Follow the mixing instructions your pharmacy sent with the vial, and use the milligrams per milliliter the pharmacy gives you as your step 1 number.
Where can I find the actual dose ladders for tirzepatide and semaglutide?
On the dosage chart pages. See the tirzepatide dosage chart and the semaglutide dosage chart. This page covers the syringe math only and does not list doses, schedules or titration steps.
Why does the FDA care about this arithmetic?
The FDA has noted that many patients who received vials of compounded semaglutide lacked experience with self-injections, and that unfamiliarity with withdrawing medication from a vial, coupled with confusion between milliliters, milligrams and units, may have contributed to dosing errors.